Series Blauberg Axis-FP

Use

• The fans are used for extraction of smoke in case of fire and removal of hot air outside. The fans are also used for general ventilation systems.
• The fans are rated for permanent operation at ambient air temperatures from -60 °C up to +50 °C (depends on climatic category, see the Designation key). The fans are able to operate 2 hours at the temperatures +300 °C and +400 °C.
• The fans with a fire resistance class of 200 °C/2 hours can be produced on request. The characteristics of the 200 °C/2 hours fans are completely identical to 300 °C/2 hours fans.

Design

• The fan consists of a casing, an impeller and a motor. The metal casing with rolled flanges helps achieve outstanding rigidity and minimum clearances between the casing and the blades. There is an inspection hatch in the casing for easy maintenance.
• All the casing components are powder coated for improved protection against the environmental effects.
• The weight of the fans may differ from the one stated in the catalogue and depends on the components used (motor, terminal box, etc.).

Motor

• The fans are equipped with three-phase (400 V/50 Hz) motors. Motor ingress protection rating is IP55. Depending on the model, the fans have single- or double-speed modifications.
• The single-speed models are equipped with 2-, 4- or 6-pole motors.
• The double-speed models are equipped with 2/4-, 4/6- or 4/8-pole motors.

Impeller

• Depending on the size and the required air capacity the fans are equipped with impellers with 4, 5, 6, 7, 8, 9 or 12 blades angled from 20° to 50° to ensure precise matching of fans with the operating point.
• The specially designed impeller blades ensure high efficiency of the fan while keeping noise well under control.
• The impellers are dynamically balanced. Low weight and low moment of the impeller inertia help reduce the fan start-up time.
• The fan blades are made of cast aluminium.

Mounting

• The fans can be mounted on any flat surface or directly into a ventilation duct. The units are suitable for both horizontal and vertical configurations.
• Installation in the air duct requires flanges to attach the fan to the ductwork.
• To attach the fan to the floor, the wall or the ceiling use the O-AF carriers (not included as standard, should be purchased separately).
• The fans are suitable for installation on rooftops.