Blauberg Iso 160-2E

Sound-insulated inline centrifugal fans
  • Maximum airflow: 750 m3/h
  • Sound pressure level LpA at 3 m: 37 dB(A)
  • Sound insulation
  • Motor type: AC
  • Impeller type: Centrifugal forward curved blades
  • Casing material: Galvanized steel
  • Installation in any position
Unit of measurement Iso 160-2E
Connected air duct size mm 160
Minimum supply voltage V 230
Maximum supply voltage V 230
Power supply frequency Hz 50
Rated power W 335
Unit current A 1.5
Maximum airflow m3/h 750
Sound pressure level LpA at 3 m dB(A) 37 9
Weight kg 6.28
Transported air temperature (max) °С 40
Transported air temperature (min) °С -25
Ingress protection rating - IPX2
Ingress protection rating of the drive - IP44
Blauberg Iso 160-2E 58 715 2016
Trademark Blauberg
Model Iso 160-2E
Specific energy consumption (SEC) (kWh/(m2/a)) Cold Average Warm
-49.6 A+ -22.5 D -7 F
Type of ventilation unit Unidirectional
Type of drive installed Variable speed
Type of heat recovery system None
Maximum flow rate (m3/h) 715
Electric power input (W) 313
Reference flow rate (m3/s) 0.139
Reference pressure difference (Pa) 50
Specific power input (SPI) (W/(m3/h)) 0.438
Control typology Local demand control
Maximum external leakage rates (%) 2.7
Declared typology RVU UVU
Sound power level (dB(A)) 58
The annual electricity consumption (AEC) (kWh/a) Cold Average Warm
232 232 232
The annual heating saved (AHS) (kWh/a) Cold Average Warm
5536 2830 1280
Datasheet
Iso - data sheet
760 Kb
Datasheet
Iso 160-2Е - specification
35 Kb
Datasheet
Iso 160-2Е - energy label
57 Kb
Manual
Iso - user's manual
1.64 Mb
Image
Iso 160-2E - image 1
883 Kb
ØD B H L P
158 231 343 358 48
Name Photo Description
Blauberg CDT E1.8 CDT E1.8 Thyristor speed controller
Name Photo Description
Blauberg TE / TI 1.5 TE / TI 1.5 Timers
Blauberg HSE / HSI 1.5 HSE / HSI 1.5 Sensors
Blauberg LSE / LSI 1.5 LSE / LSI 1.5 Sensors
Blauberg IRSE / IRSI 1.5 IRSE / IRSI 1.5 Sensors