Blauberg Iso 125-2E

Sound-insulated inline centrifugal fans
  • Maximum airflow: 505 m3/h
  • Sound pressure level LpA at 3 m: 38 dB(A)
  • Sound insulation
  • Motor type: AC
  • Impeller type: Centrifugal forward curved blades
  • Casing material: Galvanized steel
  • Installation in any position
Unit of measurement Iso 125-2E
Connected air duct size mm 125
Minimum supply voltage V 230
Maximum supply voltage V 230
Power supply frequency Hz 50
Rated power W 155
Unit current A 0.7
Maximum airflow m3/h 505
Sound pressure level LpA at 3 m dB(A) 38 3
Weight kg 4.57
Transported air temperature (max) °С 40
Transported air temperature (min) °С -25
Ingress protection rating - IPX2
Ingress protection rating of the drive - IP44
Blauberg Iso 125-2E 57 467 2016
Trademark Blauberg
Model Iso 125-2E
Specific energy consumption (SEC) (kWh/(m2/a)) Cold Average Warm
-51.1 A+ -24.1 C -8.6 F
Type of ventilation unit Unidirectional
Type of drive installed Variable speed
Type of heat recovery system None
Maximum flow rate (m3/h) 467
Electric power input (W) 149
Reference flow rate (m3/s) 0.091
Reference pressure difference (Pa) 50
Specific power input (SPI) (W/(m3/h)) 0.319
Control typology Local demand control
Maximum external leakage rates (%) 2.7
Declared typology RVU UVU
Sound power level (dB(A)) 57
The annual electricity consumption (AEC) (kWh/a) Cold Average Warm
169 169 169
The annual heating saved (AHS) (kWh/a) Cold Average Warm
5536 2830 1280
Datasheet
Iso - data sheet
760 Kb
Datasheet
Iso 125-2Е - specification
35 Kb
Datasheet
Iso 125-2Е - energy label
57 Kb
Manual
Iso - user's manual
1.64 Mb
Image
Iso 125-2E - image 1
883 Kb
ØD B H L P
123 204 308 310 48
Name Photo Description
Blauberg CDT E1.8 CDT E1.8 Thyristor speed controller
Name Photo Description
Blauberg TE / TI 1.5 TE / TI 1.5 Timers
Blauberg HSE / HSI 1.5 HSE / HSI 1.5 Sensors
Blauberg LSE / LSI 1.5 LSE / LSI 1.5 Sensors
Blauberg IRSE / IRSI 1.5 IRSE / IRSI 1.5 Sensors