Series Blauberg Qubit-E 35/60

Nuevo

Ventiladores centrífugos Qubit de extracción y de alta presión, para sistemas de conductos con alto contraflujo de aire

Tipo de rodete: Centrífugo de palas curvadas hacia delante
Sensor de movimiento

The Blauberg Qubit high-pressure extract centrifugal fan is an effective solution for ventilating rooms in high-rise buildings, which an ordinary axial fan would not handle.
The centrifugal impeller of innovative design creates the pressure that enables significant lengths of ductwork to be easily traversed and ensures stability of ventilation systems in case of pressure drops.
This model is designed to be mounted in walls or in the ceiling, allowing it to fit seamlessly into any interior.

Fan advantages

Our new centrifugal impeller of special design provides 8 times higher pressure than an ordinary axial fan to traverse long air ducts in private or apartment buildings.
Due to a high water ingress protection rating of IP45, the fan can be installed in high-humidity rooms, e.g. kitchen, bathroom, etc.
The fan’s delivery set also includes an air filter, which can be cleaned using a dishwasher.
The fan is equipped with a back valve, which prevents back flow of stale air from outdoors.
The reliable, two-speed motor is equipped with ball bearings and features low energy consumption and high productivity.
The fan can be equipped with a timer, and a humidity or motion sensor.

Modifications

Models of the series can be equipped with extra options:

Name	Description	Icon
Qubit T	The fan is equipped with a turn-on delay timer (1, 2 or 5 min), turn-off delay timer (5, 15 or 30 min) and an interval timer (30 min of operation every 4 hours). After switching on a switch, e.g. lights, the fan switches to high speed after the time interval preset by the turn-off delay timer. When the interval timer mode is on, the fan starts operating at high speed for 30 minutes every 4 hours.
Qubit H	The fan is equipped with a turn-on delay timer (1,2 or 5 min), a turn-off delay timer (5, 15 or 30 min), an interval timer (30 minutes of operation every 4 hours) and a humidity sensor. The humidity sensor has two modes of operation: Manual mode allows to set the humidity level to 60%, 70%, 80 % or 90%. If this threshold is exceeded, the fan switches to high speed. Auto – intelligent humidity control. The fan automatically selects the optimum humidity level for the room, in which it is installed. The choice of the fan operation algorithm is determined based on the indoor air quality level statistics.
Qubit IR	The fan is equipped with a turn-on delay timer (1,2 or 5 min), a turn-off delay timer (5, 15 or 30 min), an interval timer (30 minutes of operation every 4 hours) and a motion sensor. If the fan is triggered by the motion sensor, the fan switches to high speed in the time preset by the turn-off delay timer. When motion is no longer detected, the fan keeps operating at high speed for the time set by the turn-off delay timer.

Línea de modelos Blauberg Qubit-E 35/60	Potencia nominal, W	Caudal máximo de aire , m³/h	Nivel de presión sonora LpA a 3 m, dB(A)	Temporizador	Number of speeds
Qubit-E 35/60	20	60	21		2
Qubit-E 35/60 T	20	60	21	Temporizador de encendido, Temporizador de apagado, Temporizador de intervalos	2
Qubit-E 35/60 TH	20	60	21	Temporizador de encendido, Temporizador de apagado, Temporizador de intervalos	2
Qubit-E 35/60 TP	20	60	21	Temporizador de encendido, Temporizador de apagado, Temporizador de intervalos	2

Crear PDF

Ficha técnica

Qubit - leaflet

1.8 Mb

Ficha técnica

Qubit - data sheet

584 Kb

Imágenes

Qubit-E 35/60 - imagen 1

404 Kb