Series Blauberg BlauCool BLHP-R-Split

MULTI APPLICATIONS IN ONE SYSTEM

• Includes hydronic module, no extra insulation of hot water pipes.
• Domestic hot water production all year round.
• Heating in winter and cooling in summer.
• Wide range of solutions: floor heating, radiators and fan coils.
• Ggreat comfort at home even at low outdoor temperatures.
• Environmental friendly: using R32 refrigerant.

ECO FRIENDLY

• R32 (HFC-32) is a highly environmentally friendly refrigerant, with 0 ODP and 675 GWP, low carbon footprint, no harm to the Ozone.

HIGH ENERGY EFFICIENCY

• ATW heat pumps are relying on renewable energy for their functioning, the increased use of renewable energy will also reduce our energy dependency.
• ErP directive:
  • ηs, seasonal space heating energy efficiency
  • ηs average up to A++ @ 35 °C
  • ηs average up to A++ @ 55 °C

WIDE OPERATION RANGE

• Cooling operating temperature is up to 46 °C.
• Heating operating temperature is down to -28 °C.
• The max. water outlet temperature is up to 60 °C.

CAPTURE ENERGY FROM AMBIENT AIR

• Based on Air to Water heat pump technology, it captures heat energy from the ambient air and transfers it to heat the water that is used to warm your home and supply domestic hot water, it can even cool your home as required. Compared to other technologies, up to 75 % of the heat energy required is taken from the ambient air.

HYDRONIC MODULE COMPONENTS

FULL CAPACITY IN LOW AMBIENT TEMPERATURE

• Thanks to the high compression ratio compressor, large heat exchanger and high-precision system control, it is able to maintain a high heat level and even at -10 °C and -15 °C.

TOUCH SCREEN WIRED CONTROLLER

• Standard wired controller with touch screen, more functions can be realized and it is easier to operate.
• Wired controller can be disconnected from the hydronic module and installed in the room to detect room temperature.
• An additional cover is provided.

WIRED CONTROLLER FUNCTIONS

• Window design, easy to operate & view.
• Mode control, temperature setting, heating mode, cooling mode, DHW mode, combined mode.
• Weekly timer function.
• Electric heater.
• Forced defrosting.
• Sterilization.
• Anti-freezing protection.

• Wi-Fi control (optional).

HIGH PRESSURE RATIO COMPRESSOR

• High pressure ratio compressor, the ratio is high to 13, which has better performance in low ambient temperature.
• Well known brand, GMCC.
• Rotary DC inverter compressor.
• Refrigerant: R32.

PLATE HEAT EXCHANGER

• Heat transfer is efficient for both heating and cooling use.
• With a small footprint.
• Can withstand high temperatures and high pressures.

DC FAN MOTOR

• DC brushless fan motor.
• Higher efficiency, lower noise.

INVERTER WATER PUMP

• High efficiency inverter water pump.
• Water head is 9 m for 8 kW, 12 kW and 16 kW hydronic module.
• Compliance with CE and VDE.
• 50/60 Hz.

BIGGER HEAT EXCHANGER

• Bigger heat exchanger, to meet the area of heat exchanging in low ambient temperature.
• Flat type fin, improve defrosting performance.

EXPANSION TANK

• As water is heated, it expands and its pressure increases if there’s no room for thermal expansion, which will cause major issues with water system including failure or bursting.
• Expansion tank is used to keep the water system pressure stable.
• Pre pressure: 0.15 MPa.
• Volume: 2 L.

INTEGRATED PCB

• Integrated PCB for single phase unit, reduce the damage rate of each component.

VALVES

• Water flow switch.
  • When water flow is insufficient, the port is disconnected to shutdown the unit.
  • Protect the hydronic module.

• Air purge valve.
  • Installed in the highest place of the hydronic module.

• Safety valve.
  • When the system pressure exceeds the specified value, the safety valve will be opened.
  • Open pressure: 6 bar (0.6 MPa).