Series Blauberg BlauAir BLS CFP

New

Compact air handling units with high-efficiency counter flow heat exchanger up to 9 000 m³/h

Heat exchanger type: Counter flow
Sound insulation: mineral wool
Motor type: EC
Bypass: Automatic

Reheater: Optional
Preheater: Optional
BMS protocol: ModBus
Control: Wired control panel

Suspended heat recovery ventilation units – BLS CFP

The BLS CFP false ceiling series of air handling units provides a cost-efficient and space-optimized solution, available in multiple sizes to accommodate a wide range of airflow requirements. It іs frameless, compact design facilitates seamless integration into ceiling voids or suspended ceiling systems. The compact design ensures effortless transport and installation, even in confined spaces.

Featuring counterflow heat exchangers, ensure high efficiency while minimizing leakage.
Casing with 50 mm insulation to ensure low noise levels.
Casing made of AlZn, with an optional coating for enhanced corrosion resistance.
Externally mounted connection box, containing all wiring and electrical components, enabling quick and easy connection.
A wide range of duct accessories (pre-heaters, post-heaters, coolers, connection reducers, flexible mounts, extra filtration, silencers, etc.) to meet any customer requirements.

Improved design with better performance

T2 / TB2 / L1 / D1

The construction of the case with a PVC profile ensures the absence of thermal bridges, minimizes heat loss and reduces the noise level.

Design

Condencing counter-flow heat exchanger.
Integrated bypass with Belimo drive.
EC type fans with plastic or metal impellers.
Casing with 50 mm mineral wool insulation and AlZn skins, optional galvanized coated.
Casing properites: D1(M), L1(M), F9(M), T2, TB2.
Panel filters with ePM2.5 70% F7/ ePM10 55% M5 filtration classes.
External control cabinet with easy access.
Damper with Belimo drive.

Main characteristics

Size	Nominal air flow, m³/h	Instalation type	Overall hight, mm	Heat exchanger material	Unit location	Service side	Energy-saving features
BLS10 CFP800	800	suspended	400	polystyrene/ aluminum	indoor	Left/ Right	T2/TB2
BLS10 CFP1200	1200	suspended	400	polystyrene/ aluminum	indoor	Left/ Right	T2/TB2
BLS10 CFP1800	1800	suspended	450	polystyrene/ aluminum	indoor	Left/ Right	T2/TB2
BLS20 CFP2400	2400	suspended	500	polystyrene/ aluminum	indoor	Left/ Right	T2/TB2
BLS30 CFP3300	3300	suspended	500	polystyrene/ aluminum	indoor	Left/ Right	T2/TB2
BLS40 CFP4200	4200	suspended	590	polystyrene/ aluminum	indoor	Left/ Right	T2/TB2
BLS55 CFP5400	5400	suspended	950	polystyrene/ aluminum	indoor	Left/ Right	T2/TB2
BLS65 CFP6600	6600	suspended	950	polystyrene/ aluminum	indoor	Left/ Right	T2/TB2
BLS95 CFP8700	8700	suspended	1200	polystyrene/ aluminum	indoor	Left/ Right	T2/TB2

Integrated control system

Plug-and-play unit: full electric wiring

Additional option – full factory electric wiring includes:

Installation of air damper actuators. Routing of contacts from actuators to the terminal box.
Installation of differential pressure switches in filter sections. Installation of a relay actuation threshold to the necessary level (final pressure drop according to the selection).
Installation of frost protection thermostats in water heating coils sections.
Installation of the VFD in the rotary heat exchanger section.
Installation of bypass damper actuators in the plate heat exchanger section.
Routing of all electric contacts in the electric heater sections.
Routing of all electric contacts in the fan sections.
Installation and adjustment of all temperature and humidity sensors inside the unit.
All the electric contacts are routed to the junction box, which is mounted in one of the sections.
Plug-and-play option implies the possibility of shipment in separate blocks. In this case, joints and connection boxes are installed between the sections.

Building Management Systems

BlauAir BLS units control system can be easily integrated into building management systems
(SCADA, BMS, "smart house").

All the information processed by a programmable logic controller, is easily accessible via standard communication protocols:

MODBUS TCP;
LON WORKS.

Any other protocol can be used a ccording to customer’s choice and project requirements.

Selection program of BlauAir BLS

Easy selection.
All selections could be saved in the Dashboard

All the latest information on different types of units, as well as all available accessories, can be found in the Blauberg-selector selection program.