Series Blauberg Turbo

Mixed-flow inline fans
  • Impeller type: Mixed-flow
The Blauberg Turbo series fans are used in supply or exhaust ventilation systems for various types of rooms; in particular, they are suitable for use in kitchens and bathrooms. Designed for round air ducts with a diameter of 100 to 315 mm.
Design

The casing is made of low-flammability polypropylene.

The fan is equipped with a terminal box, which can be rotated to any position.

The impeller ensures efficient fan operation with an optimal balance of airflow and noise level.

The special casing design makes it easy to remove the impeller and motor unit for fan maintenance without dismantling the air duct.

Motor
Two-speed single-phase motor with ball bearings. Equipped with overheating protection.
Mounting
Blauberg Turbo series fans are suitable for floor, wall, and suspended mounting.

The fan can be installed at any point in the ventilation system—from the air intake point to the end sections of the air ducts.
Several fans can be installed in parallel within a single system for higher air flow or in series to increase operating pressure.

TD: mounting kit for installing fans of the same diameter in parallel (to increase air flow).


TL: mounting kit for installing fans of the same diameter in series (to increase pressure).

Modifications
A wide range of modifications enables you to select the optimal solution for various needs.
NameDescription
Turbo Tturn-off delay timer adjustable from 2 to 30 minutes
Turbo USthree-position speed switch
Turbo FR1smooth speed controller adjustable from 0 to 100 % and power cable with mains plug
Turbo G1speed controller, temperature controller with external temperature sensor, power cable with mains plug
Turbo GT1speed controller, temperature controller with external temperature sensor, 5 min timer switch and power cable with mains plug
Turbo Gl1speed controller, temperature controller with integrated temperature sensor and power cable mains plug
Turbo GTl1
speed controller, temperature controller with integrated temperature sensor, 5 min timer switch and power cable with mains plug 
Turbo W1power cable with mains plug
Innovative series of fans with a new-generation impeller - BLAUBERG PRIMO
  • Thanks to its new-generation impeller, the Blauberg Primo fan provides an air flow of up to 3,350 m³/h, combining high energy efficiency, low noise level, and ease of installation and maintenance.
  • Designed for air ducts with diameters ranging from 150 to 400 mm.
  • The improved three-speed motor offers optimal operating mode selection; there are also models with three-speed AC motors and energy-efficient EC motors available.
Filters: Connected air duct size: 100
Lineup Blauberg Turbo Connected air duct size, mm Phases Rated power, W Maximum airflow, m³/h Temperature sensor Timer Number of speeds
100 1 25 245 2
100 1 25 245 2
100 1 25 245 2
100 1 25 245 2
100 1 25 245 2
100 1 25 245 Turn off timer 2
100 1 25 245 Turn off timer 2
100 1 25 245 2
100 1 25 245 Turn off timer 2
100 1 25 245 Turn off timer 2
100 1 25 245 2
Datasheet
Turbo - data sheet
958 Kb
Datasheet
Turbo 100 - specification
35 Kb
Manual
Turbo (120V/60Hz) - user's manual (B77EN-120/60-05)
1.76 Mb
Manual
Turbo - user's manual (B77EN-05)
1.77 Mb
Certificates
Turbo, Turbo E - certificate LVD
133 Kb
Image
Turbo - image 1
498 Kb