Products
Domestic ventilation
Commercial and industrial ventilation
Decentralized ventilation units
Air handling units
Cooling&Heating
Smoke extraction
Air distribution
Downloads
Equipment selection
Contact us
About us
EN
International
EN ES RU
Ireland
EN
Germany
DE
United Kingdom
EN
Australasia
EN
North America
EN
Ukraine
UA
China
CN
Brazil
PT
Asia
EN
Sri Lanka
EN
Pakistan
EN
Hong Kong
EN
India
EN
Malaysia
EN
Indonesia
EN
Vietnam
EN
Mongolia
EN
Bangladesh
EN
Thailand
EN
South Korea
EN
Philippines
EN
Latin America
EN ES
Bolivia
ES
Uruguay
ES
Argentina
ES
Chile
ES
Paraguay
ES
/ Product catalogue / Smoke extraction / Medium pressure and smoke extraction axial fans / Medium pressure axial fans / Axis-P

Series Blauberg Axis-P

Series Blauberg Axis-P - Medium pressure axial fans - Medium pressure and smoke extraction axial fans
Medium pressure axial fans
  • Impeller type: Axial
Use

The fans are used:

  • as a part of a smoke extraction system for air pressurization to create a positive air pressure differential in stairway enclosures, airlock vestibules and lift shafts, to prevent spreading of smoke in premises, protect people using evacuation routes from fire hazards and enable conditions for fire-extinguishing measures.
  • in general ventilation systems in industrial, administrative and residential buildings.



Design
  • The metal casing with rolled flanges helps achieve outstanding rigidity and minimum clearances between the casing and the blades. There is an inspection hatch in the casing for easy maintenance.
  • All the casing components are powder coated for improved protection against the environmental effects.
  • The weight of the fans may differ from the one stated in the catalogue and depends on the components used (motor, terminal box, etc.).



Motor
  • The fans are equipped with three-phase (400 V/50 Hz) single-speed 2-, 4- or 6-pole electric motors.
  • Motor with energy efficiency class IE3 on request.
  • Motor ingress protection rating is IP55.
Impeller
  • Depending on the size and the required air capacity the fans are equipped with impellers with 6 or 8 blades angled from 20° to 50° with variation from 2.5 up to 5° to ensure precise matching of fans with the operating point.
  • The specially designed impeller blades ensure high efficiency of the fan while keeping noise well under control. The impellers are dynamically balanced. Low weight and low moment of the impeller inertia help reduce the fan start-up time.
  • The fan blades can be made of the following materials:
    • PAG – fiberglass reinforced polyamide
    • AL – aluminium
  • Please confirm the blade material while placing your order.



Mounting
  • The fans can be mounted on any flat surface or directly into a ventilation duct. The units are suitable for both horizontal and vertical configurations. In-duct installation requires flanges to attach the fan to the ductwork.
  • To attach the fan to the floor, the wall or the ceiling use the O-AF carriers (not included as standard, should be purchased separately).
  • The units are suitable for installation on rooftops to provide direct supply of outdoor air to the stairway areas.
Complete solutions for axial fans
Installation example of axial fans on rooftop
Fan installation into an air duct system
  • To ensure a uniform air flow, the fan should be preceded by a straight duct section with a cross-section area equal to half of that of the fan. The length of the duct section should be 3 ÷ 4 D (D is the inner diameter of the fan). The length of the straight duct section downstream of the fan should be 1.5 ÷ 2 D.
  • Reduction of the recommended duct length values results in a drop of the fan pressure and performance. To reduce noise and vibration, use the VVGF flexible joints.


Fan installation with no upstream ducting
  • Axial fans without upstream ducting must be equipped with a VK-AF inlet cone to improve the air flow parameters.


Fan installation with no downstream ducting
  • If the axial fan is a terminal device of the ventilation system (i.e. there is no downstream ducting), the unit must be equipped with a diffuser to reduce the air flow velocity and the fan dynamic pressure. Reduction of the air discharge velocity results in a significant reduction of shock losses which are proportional to the square of velocity decrement
  • The fan should not be equipped with a downstream contractor.

Installation near bends
  • To install the fan directly downstream of a bend (elbow), use a curved section with a large bending radius or an array of internal guide vanes.



Changing diameter installation
  • When changing from a smaller diameter to a larger one use a connector diffuser with the maximum opening angle of 12°.


Obstructed space installation
  • To ensure normal operation of the fan in an obstructed space, make sure to provide for a sufficient distance between the inlet and outlet flanges and the floor, walls, bulky equipment and obstacles.

Filters: Connected air duct size: 630
Lineup Blauberg Axis-P Connected air duct size, mm Rated power, W Maximum airflow, m³/h Number of blades, pcs. Blade setting angle, degrees Impeller material
Blauberg Axis-P 630-2D/3-8/25/AL Axis-P 630-2D/3-8/25/AL
630 3000 15000 8 25 Aluminium
Blauberg Axis-P 630-2D/4-8/30/AL Axis-P 630-2D/4-8/30/AL
630 4000 19000 8 30 Aluminium
Blauberg Axis-P 630-2D/5.5-8/35/AL Axis-P 630-2D/5.5-8/35/AL
630 5500 24300 8 35 Aluminium
Blauberg Axis-P 630-2D/7.5-8/40/AL Axis-P 630-2D/7.5-8/40/AL
630 7500 27800 8 40 Aluminium
Blauberg Axis-P 630-2D/9.2-6/30/AL Axis-P 630-2D/9.2-6/30/AL
630 9200 28800 6 30 Aluminium
Blauberg Axis-P 630-2D/11-6/32.5/AL Axis-P 630-2D/11-6/32.5/AL
630 11000 31100 6 32.5 Aluminium
Blauberg Axis-P 630-2D/11-6/35/AL Axis-P 630-2D/11-6/35/AL
630 11000 33400 6 35 Aluminium
Blauberg Axis-P 630-2D/15-6/37.5/AL Axis-P 630-2D/15-6/37.5/AL
630 15000 35400 6 37.5 Aluminium
Blauberg Axis-P 630-2D/15-6/40/AL Axis-P 630-2D/15-6/40/AL
630 15000 37400 6 40 Aluminium
Blauberg Axis-P 630-2D/18.5-6/45/AL Axis-P 630-2D/18.5-6/45/AL
630 18500 40900 6 45 Aluminium
Blauberg Axis-P 630-2D/3-8/25/PAG Axis-P 630-2D/3-8/25/PAG
630 3000 15000 8 25 Fiberglass reinforced polyamide
Blauberg Axis-P 630-2D/4-8/30/PAG Axis-P 630-2D/4-8/30/PAG
630 4000 19000 8 30 Fiberglass reinforced polyamide
Blauberg Axis-P 630-2D/5.5-8/35/PAG Axis-P 630-2D/5.5-8/35/PAG
630 5500 24300 8 35 Fiberglass reinforced polyamide
Blauberg Axis-P 630-2D/7.5-8/40/PAG Axis-P 630-2D/7.5-8/40/PAG
630 7500 27800 8 40 Fiberglass reinforced polyamide
Blauberg Axis-P 630-2D/9.2-6/30/PAG Axis-P 630-2D/9.2-6/30/PAG
630 9200 28800 6 30 Fiberglass reinforced polyamide
Blauberg Axis-P 630-2D/11-6/32.5/PAG Axis-P 630-2D/11-6/32.5/PAG
630 11000 31100 6 32.5 Fiberglass reinforced polyamide
Blauberg Axis-P 630-2D/11-6/35/PAG Axis-P 630-2D/11-6/35/PAG
630 11000 33400 6 35 Fiberglass reinforced polyamide
Blauberg Axis-P 630-2D/15-6/37.5/PAG Axis-P 630-2D/15-6/37.5/PAG
630 15000 35400 6 37.5 Fiberglass reinforced polyamide
Blauberg Axis-P 630-2D/15-6/40/PAG Axis-P 630-2D/15-6/40/PAG
630 15000 37400 6 40 Fiberglass reinforced polyamide
Blauberg Axis-P 630-2D/18.5-6/45/PAG Axis-P 630-2D/18.5-6/45/PAG
630 18500 40900 6 45 Fiberglass reinforced polyamide
Blauberg Axis-P 630-4D/0.37-8/25/AL Axis-P 630-4D/0.37-8/25/AL
630 370 7500 8 25 Aluminium
Blauberg Axis-P 630-4D/0.55-8/30/AL Axis-P 630-4D/0.55-8/30/AL
630 550 9500 8 30 Aluminium
Blauberg Axis-P 630-4D/0.75-8/35/AL Axis-P 630-4D/0.75-8/35/AL
630 750 12200 8 35 Aluminium
Blauberg Axis-P 630-4D/1.1-8/40/AL Axis-P 630-4D/1.1-8/40/AL
630 1100 13900 8 40 Aluminium
Blauberg Axis-P 630-4D/1.5-6/32.5/AL Axis-P 630-4D/1.5-6/32.5/AL
630 1500 15600 6 32.5 Aluminium
Blauberg Axis-P 630-4D/1.5-8/45/AL Axis-P 630-4D/1.5-8/45/AL
630 1500 16500 8 45 Aluminium
Blauberg Axis-P 630-4D/1.5-6/37.5/AL Axis-P 630-4D/1.5-6/37.5/AL
630 1500 17700 6 37.5 Aluminium
Blauberg Axis-P 630-4D/2.2-6/40/AL Axis-P 630-4D/2.2-6/40/AL
630 2200 18700 6 40 Aluminium
Blauberg Axis-P 630-4D/2.2-6/45/AL Axis-P 630-4D/2.2-6/45/AL
630 2200 20400 6 45 Aluminium
Blauberg Axis-P 630-4D/0.37-8/25/PAG Axis-P 630-4D/0.37-8/25/PAG
630 370 7500 8 25 Fiberglass reinforced polyamide
Blauberg Axis-P 630-4D/0.55-8/30/PAG Axis-P 630-4D/0.55-8/30/PAG
630 550 9500 8 30 Fiberglass reinforced polyamide
Blauberg Axis-P 630-4D/0.75-8/35/PAG Axis-P 630-4D/0.75-8/35/PAG
630 750 12200 8 35 Fiberglass reinforced polyamide
Blauberg Axis-P 630-4D/1.1-8/40/PAG Axis-P 630-4D/1.1-8/40/PAG
630 1100 13900 8 40 Fiberglass reinforced polyamide
Blauberg Axis-P 630-4D/1.5-6/32.5/PAG Axis-P 630-4D/1.5-6/32.5/PAG
630 1500 15600 6 32.5 Fiberglass reinforced polyamide
Blauberg Axis-P 630-4D/1.5-8/45/PAG Axis-P 630-4D/1.5-8/45/PAG
630 1500 16500 8 45 Fiberglass reinforced polyamide
Blauberg Axis-P 630-4D/1.5-6/37.5/PAG Axis-P 630-4D/1.5-6/37.5/PAG
630 1500 17700 6 37.5 Fiberglass reinforced polyamide
Blauberg Axis-P 630-4D/2.2-6/40/PAG Axis-P 630-4D/2.2-6/40/PAG
630 2200 18700 6 40 Fiberglass reinforced polyamide
Blauberg Axis-P 630-4D/2.2-6/45/PAG Axis-P 630-4D/2.2-6/45/PAG
630 2200 20400 6 45 Fiberglass reinforced polyamide
Datasheet
Axis-P - data sheet
984 Kb
Manual
Axis-P - user's manual
2.8 Mb
BIM/CAD-models
Axis-P
4.1 Mb
Image
Axis-P - image 1
463 Kb
We are in social networks